707-98-23860 7079823860 Oil And Wear Resist Slide Cylinder Seal Kit Komatsu For PC38UU-3 PC45MR-1 PC45MRX-1
| Products Name | 707-98-23860 Slide Cylinder Seal Kit |
| Material | PU , Rubber , PTFE , NBR , HNBR , ACM , VMQ |
| Type | Komatsu Excavator Replacement Parts |
| Model Number | Komatsu PC38UU-3, PC45MR-1, PC45MRX-1 |
| Payment Terms | Western Union, Paypal, TT, Transfer |
| Supply Ability | 7000 Piece/Pieces per Month |
| MOQ | 1 SET(negotiation) |
| Feature | Abrasion Resistant, Oil Resistance, High Chemical Resistance |
| Brand Name | Suncar/ OEM |
| CertifiC.A.Tion | ISO9001:2000 |
| Shipping Mode | By air, by sea ,by express (DHL, Fedex, UPS ,TNT etc.) |
| Size | Standard Size |
Product Show:
Related Part:
| POS. | Number | Name | Qty. |
| | 20S-63-02290 | CYLINDER ASSEMBLY | 1 |
| 1 | 20S-63-17140 | • CYLINDER | 1 |
| 2 | 07143-10404 | • BUSHING | 1 |
| 3 | 07145-00040 | • SEAL,DUST (KIT) | 2 |
| 4 | 707-29-75010 | • HEAD,CYLINDER | 1 |
| 5 | 07177-04530 | • BUSHING | 1 |
| 6 | 707-51-45210 | • PACKING,ROD (KIT) | 1 |
| 7 | 112-63-15370 | • SEAL,DUST (KIT) | 1 |
| 8 | 07179-12057 | • RING,SNAP | 1 |
| 9 | 07000-12070 | • O-RING (KIT) | 1 |
| 10 | 707-35-52760 | • RING,BACK-UP (KIT) | 1 |
| 11 | 07000-02075 | • O-RING (KIT) | 1 |
| 12 | 20S-63-67121 | • ROD,PISTON | 1 |
| 13 | 07143-10404 | • BUSHING | 1 |
| 14 | 07145-00040 | • SEAL,DUST (KIT) | 2 |
| 15 | 707-36-75470 | • PISTON | 1 |
| 16 | 707-44-75180 | • RING,PISTON (KIT) | 1 |
| 17 | 707-39-75190 | • RING,WEAR (KIT) | 1 |
| 18 | 01580-03326 | • NUT | 1 |
| K | 707-98-23860 | SERVICE KIT,SLIDE CYLINDER | 1 |
Key points for the use of seals:
1. Select the appropriate seal material and hydraulic oil, as well as the adaptability to the working temperature and the compatibility of the oil.
2. The geometric position accuracy (concentricity) of the sliding parts relative to the seal is high, the material is good (such as hard chrome plating) and the surface roughness is fine, which can prolong the service life.
(1) For oil seals used in hydraulic pumps and motor journals, it is not only required that the roughness of the sliding surface be within Ra of 0.25m, but also that the surface should be plated with hard chrome, and the oil seal lip should be properly adjusted according to the specific situation during specific use. The radial spring force makes it moderately tight, and a mounting sleeve or a thin gasket should be used to protect the sealing ring during installation to prevent the lip from rolling and twisting, causing the spring to slip out.
(2) The inner surface of the hydraulic cylinder is usually processed by rolling, which not only improves the surface roughness, but also makes the surface hardened by cold work, which is beneficial to prolong the service life of the sealing ring. In addition, the pressure used, the length and type of the sliding surface also have a great influence on the service life. Therefore, the "regular inspection" time should be decided according to these conditions.
(3) The sealing surface is required to be well lubriC.A.Ted to prevent dirt from invading. The use of fluids that meet the specified cleanliness levels and the correct installation method are also necessary conditions.
FAQ:
Q1: Can I get the sample?
Yes, pay sample, freight collect.
Q2: When will you ship my order?
Normally, it is within 3 days after the customer pays.
Q3: How long can I receive the goods?
It depends on the mode of transportation.
Q4: How can I trace my order?
We will send the tracking number to you by e-mail or other contact details.
Q5: Quality of the products have a guarantee?
Please feel free to buy, 100% strict control to ensure product quality.
Precautions:
1. Before designing grooves, please read the descriptions of each series of products by yourself, and clearly distinguish whether the product uses an integral groove or a split groove; during the process of installing the seals, pay attention to avoid sharp edges, and the hole seals must be installed in the integral groove. With the help of installation tools; the designer must consider parameters such as groove dimensional accuracy, surface roughness, extrusion gap, etc. For details, please refer to the product instruction manual, diagram and size table.
2. Before installing the seal, it must be ensured that there are no impurities and cracks in the sealing groove, and operating oil should be applied to the sealing groove and the surface of the seal respectively; the seals should be installed gradually in sequence; Avoid twisting and skewing; if it is a split slot, tighten the gland last.
Order Process:
1. Getting your inquiry (Including: machine model, part name, order quantity, data of items, delivery term)
2. Quoting our competitive price for you
3. Place an order after approving the quotation or products
4. We will send Proforma Invoice or sales confirmation
5. You prepay by T/T or L/C or Western Union through bank
6. We will starting to produce after we get your kind payment
7. Packing
8. Shipping the goods to your(our)forwarder
9. Sending all doc for your custom clearance
10. Time to reorder
Main Advantage:
1. More than ten years of industry experience.
2. Excellent quality and competitive price
3. Large inventory of more than 30,000 sizes and more than 10,000 pieces of inventory.
4. Support OEM/ODM orders.
5. Fast delivery
6. Professional Services
Product Tags:
|
|
707-98-23860 7079823860 Oil And Wear Resist Slide Cylinder Seal Kit Komatsu For PC38UU-3 PC45MR-1 PC45MRX-1 Images
|
